UM-0203
Rev 1.1
37 | P a g e
FROG-XT6-P Examination Checklist
continued…
(Page 3 of 3)
Item
No
Description
Comment / Serial
No./ Colour Code
Pass /
Fail
Verified
By
13.
Stickers -
Check that all of the stickers on the unit are in good condition and that none are missing or
damaged. The sticker location drawing can be found in the drawing pack.
14.
Stretcher Fittings
–
Visually inspect the stretcher fittings to ensure that they are all present and in
good condition.
15.
Load Test -
On critical parts replacement, a load test must be conducted. This is to be done by an
independent test house company, nationally recognised and in accordance with ILO 152.
16.
Inspection data plate-
Update the inspection data plate after completion of approved
examination/inspection
17.
Post Load Test Visual Inspection
–
If a load test is done, conduct and report a post load test visual
inspection.
Storage
18.
Storage of FROG -
Check the storage cover is in good condition and not showing any signs of UV or
wind degradation.
Storage off the ground, use of spacer chocks whilst not in use
19.
Replacement Parts Stock -
Check condition of all associated replacement parts and accessories.
Lifting assemblies should be stored in an appropriate dry place without high visibility cover fitted.
Reports
Complete
Y/N
20.
Documentation / Report including Photographic Report
NOTES: