UM-0203
Rev 1.1
43 | P a g e
Suspension Kit
RA0273
2 X Springs
2 x Recoil Dampers
Associated Fixings
Medevac Package
RA0987
Unit cover
2 x stretchers
6.3
Parts identification
Each assembly or part is assigned a part number which provides the unique identification of
the part /assembly.
Where material grades and material traceability are deemed to be safety critical these
components will be allocated unique component numbers which will be stamped or etched
as required.
Components that require unique identification are referenced in the parts list.
For bolts, where etching is impractical, batches of bolts will be colour coded and a note
added to the mill certificate to identify the colour used.
6.4
Accessories
The following accessories are available from Reflex Marine to maximise operational
effectiveness. They can be supplied with the FROG-XT6-P or ordered separately.
Strobe Light
Provides greater visibility at night and in poor weather conditions.
High-intensity: light weight, waterproof to 300 m, Flash Rate 50 per
min and it also provides six-mile visibility, fitted to the top cross beam
of the FROG-XT6-P.
Note: This strobe is not certified for use in hazardous areas. A zoned strobe
light is available on request.
Basket Stretcher
Essential for conducting emergency medical transfers, Reflex Marine
supply a rigid stretcher that is compatible with the FROG-XT6-P.
Protective Cover
The cover protects against degradation from UV light and the weather
elements as well as worksite debris.
The standard protective cover has a silver reflective cover, which is
made of flame-resistant fabric (BS3408).