Method 4
Finally, you may use the Ear in between a pre-amplifier and power
amplifier input. The Ear will amplify any signal fed to the Cursa pre-
amplifier output and the link will feed the Maia/Exon power amplifiers.
The volume control on the pre-amplifier will control the headphone level
and the main speakers can be muted via the Ear.
How?
Connect the two sockets on the back marked INPUT (Red = Right, Black
= Left) to the pre-amplifier output sockets on the back of the Cursa pre-
amplifier. The two sockets on the back marked LINK (Red = Right, Black
= Left) are connected to the input sockets on the back of the power
amplifier. The mute on the front panel of the ear will mute the signal to
the speakers connected to the power amplifier. The volume control on
the pre-amplifier and the volume control on the Ear will affect the volume
level of the headphones. The best setting for the Ear volume control is
where the level of the headphones is the same as that of the main
speakers (the volume level on the Ear should be approximately 13:00
hours on the dial).
ear english manual:ear.qxd 22/11/2007 10:47 Page 4
