10
SPECIFICATIONS
AMPLIFIER OUTPUT
Power Amplifier Output (at rated 230/115V supply voltage)
105W per channel into 8Ω
127W per channel into 6Ω
162W per channel into 4Ω
Note:
Continued high level use into loads of 6Ω or less may cause
the case to exceed 40°C above ambient temperature and activate
the
thermal
shut
down.
Headphone Output
No Load
11.5V
300Ω
8.1V
54Ω
3.6V
32Ω
2.4V
Source Impedance
109Ω
DISTORTION
THD+Noise
(at 1dB below clip into 8Ω measurement bandwidth 22Hz to 22kHz)
Direct Input
(Power Amplifier)
Typically 0.005% at 1kHz
Line Inputs
Typically 0.007% at 1kHz
Preamplifier Output
Typically 0.004% at 1kHz
FREQUENCY RESPONSE
Bandwidth
(at 80W into 8Ω)
Direct Input
12Hz (0.5dB) to 95kHz (-3dB)
Line Inputs
10Hz (-1dB) to 85kHz (-3dB)
Phono Input
15Hz (-3dB) to 85kHz (-3dB)
RIAA Accuracy
Better than ±0.5dB 100Hz to 20kHz
SENSITIVITY
Input Sensitivity
(for 105W into 8Ω)
Line Inputs 2-5 and Record
196mV load 10k
Phono
2mV load 47k in parallel with 220pF
Direct Input
760mV load 50k
Power Amplifier Gain
31.6dB
Output Sensitivity
(at rated inputs)
Record Output
196mV
Pre-amplifier output
760mV
DIGITAL INPUTS
Input D1
S/PDIF Isolated 0.5V 75Ω Co-axial
Input D2
S/PDIF Optical Toslink
Supported Sampling Rates
32, 44.1, 48, 88.2, 96, 176.4, 192kHz
Supported Bit Depths
16 to 24 bit
THD+Noise (DAC Output from Tape Out)
Typically 0.004% at 1kHz
DIMENSIONS AND WEIGHT
Dimensions (WxHxD)
432 x 82 x 340mm (17 x 3.25 x 13.4in)
Net Weight
12.5kg (27.5lbs)
Packed Weight
14kg (30.9lbs)
POWER
Power Supply
AC supply 230V / 220V / 115V / 100V nominal ±10%
Power Consumption
375W at 1dB below clip into 8Ω
Fuse Ratings
T8 AL 250V - 230V 50Hz / 220V 60Hz
T4 AL 250V - 115V 60Hz / 100V 50/60Hz
Remote Batteries
AAA (1.5V) x 2
Summary of Contents for ELICIT MK5
Page 1: ...ELICIT MK5 INTEGRATED AMPLIFIER ...
Page 11: ...11 EN ELICIT MK5 ...