Manual - TC.P Quadro
Hardware options
2016-08-05
113/330
V04.52
4
The solution
The TC.LIN contains, along with a highly dynamic linear power stage, a
very fast digital controller. These combination of these two modules
makes possible the required improvement in dynamic performance.
To address the individual requirements, the following models are avail-
able in the TC.LIN family.
Other models with different parameters to the standard models can be
built on request. The related modified data will then apply.
Type identifier
Input voltage
[V]
Input
current [A]
Output
current [A]
TC.LIN.SER.26.1000.26
1000
13/26
1
13/26
1
TC.LIN.SER.40.1000.40
1000
20/40
1
20/40
1
Table 65
TopCon TC.LIN model range
1
The first value is the “alternative current range” (“half”),
the second the standard current range (“full”).
Higher power can be achieved by connecting in parallel in a multi-unit
system.
inverster
TopCon
TC.P
TopCon
TC.LIN
TopCon
TC.LIN
Load
inverter
TC.P
TC.P
(Master)
TopCon
(Slave)
TopCon
(Slave)
e.g
Fig. 59
Power supply/post-processing unit multi-unit system (with load)
In this example 3 TopCon power supplies are connected in parallel.
This multi-unit system is connected in parallel to all inputs on the related
TC.LINs and their outputs in turn connected in parallel with the load.
