Manual - TC.P Quadro
TopControl application
2016-08-05
208/330
V04.52
6
Navigation in the scope display
Within the display it is possible to navigate, measure and zoom in/out
using the mouse, the keyboard or a combination of both. The position is
indicated using a cursor.
1
2
3
4
5
Fig. 124
Indication of the cursor position in the scope display.
The actual position of the cursor
-5-
in the scope display can be seen
from red cross-wires
-1-
. The Y axis position is indicated for each chan-
nel -
2-, -3-, -4-.
The X position for the time axis is equally applicable to
all signals recorded.
The zoom functions
Element
Function in the graphic
Hold left mouse drag diago-
nally
Zoom box is drawn and the display corre-
spondingly zoomed on releasing the mouse
button.
Up to 5 zoom settings are possible.
Click right mouse button
Reset zoom one setting
Previous view
back to the original view.
Turn mouse wheel (for-
ward/backward)
Zoom in/zoom out
in X and Y direction
[Ctrl] +
turn mouse wheel (for-
ward/backward)
Zoom in/zoom out in X direction
[Shift] +
turn mouse wheel (for-
ward/backward)
Zoom in/zoom out in Y direction
Hold right mouse drag
Condition:
Zoom function already in use
Move the area displayed
as per the direction of the cursor
Table 120 Zoom functions in the scope display.
