Manual - TC.P Quadro
0) Internal
2016-08-05
269/330
V04.52
9
Flash
Code
Error
Error
message
TopCon (Long)
Description
Possible Cause
Counteraction
1-11
0A
No active controller
defined
No active system controller was
defined or identified. (Used for de-
bugging pur-pose).
In the case of repeated occur-
rence refer to customer support.
no
1-12
0B
ADC timeout
An internal timeout oc-curred during
data acquisition.
Implied by error 06)
See above error 06)
1-13
0C
ADC DMA interrupt
missing
Incomplete collection of the current
status.
Implied by error 06)
See above error 06)
1-14
0D
Internal debug error
In the case of repeated occur-
rence refer to customer support.
1-15
0E
Invalid interrupt
routine called
An unexpected interrupt routine was
called.
(Used for debugging pur-pose).
In the case of repeated occur-
rence refer to customer support.
no
1-16
0F
Old EEPROM table
loaded
The version stored in the device
parameter table differs from the up-
dated software version.
Can appear after a firmware up-
date of the main DSP.
Make sure that the correct Update-Gridfile has
been used when applying the firmware update.
(See also in the manual in section software up-
date).
