Manual - TC.P Quadro
General information
2016-08-05
23/330
V04.52
2
2.2.
General information
2.2.1.
Supplying electrical power using the TopCon power supply
The digitally regulated TopCon electrical power supplies allow the
straightforward, rapid and reliable planning, installation and commis-
sioning of industrial power supply systems in the power range from a
few kW to several 100 kW.
The TopCon power supply family includes devices with maximum out-
put voltages from 50 to 1200 V
DC
.
The maximum output current is between 13 and 700 A. In addition, an
internal resistance simulation of up to 3.2
Ω is possible.
Output
current
Pmax
I
max
CV
CP
CC
CV = Voltage control
CP = Power control
Power reduction
CC = Current control
Output
voltage
U
max
Fig. 5 Voltage, current and power characteristics of the regulated
TopCon power supplies.
Here the maximum output values are the nominal output values.
Nominal signifies a constant maximum output value
The maximum value can also include time-limited output values that
are greater than the nominal value.
Controller
CV
Voltage control
The device is in the voltage control range
CP
Power control
In the power control range the range for the voltage control and current control
will become smaller on a power reduction.
CC
Current control
The device is in the current control range
Table 7
Controller ranges.
