Fold up upper plate of RG-271, and loosen fixing screws of spring clamp and place mobile phone,
Cover upper plate on the phone, by checking positioning suction cups on the center of load of
pulling. If you try to disassemble cracked back cover or cracked LCD and glass assembly, please
use strong sticky tape and plastic plate to operate them. You need to use disassembly tool RG-
512 and RG-513 to ease disassembly together with Ethanol liquid.
When you pull the grip of suction cup, please use both hands.
One hand to hold the plate and push downward to meet the surface of phone without leaking
and with the other hand to pull the grip of suction cup.
For the other suction cup, in the same way use both hands.
Reference: If you loosen fastening screws, you can adjust positioning of suction cups also
can use only 1 suction cup manually.
When you use ethanol to pour into side of camera or side along the phone , use needle
edge bottle to effectively pour alcohol to effectively weaken stickiness of double sided
tape inside phone. You may use RG-512 and RG-513 to cut sticky matter inside phone.
RG-271 Material: Aluminum, steel, rubber, spring, 2 bearings, POM (Engineering plastic)
Weight : About 3.9Kgs
Made in Korea
Manufacturer: REGEN-I, INC
