manualshive.com logo in svg

Regency Fireplace Products HRI3E-LP1, Owners & Installation Manual

The Regency Fireplace Products HRI3E-LP1 comes with a comprehensive Owners & Installation Manual, providing detailed instructions for easy installation and use. This manual can be downloaded for free from our website, allowing you to access all the information you need to enjoy your fireplace to the fullest.

Share
Download
background image

LRI3E-1 / HRI3E-1 Direct Vent Gas Insert     

|     

3

 

 

|

 

3

table of contents

HRI3E optional log set installation ...............................22
LRI3E  log set installation  ...........................................24
Brick panel installation .................................................26
Painted black and enamel panel installation ................27
Glass door removal / installation..................................28
Vignette faceplate with Safety screen installation ........29
Inlay installation ...........................................................30
Backing plate installation .............................................32
Optional hearth trim installation ...................................33
Optional mantel deflector installation ...........................33
First Fire ......................................................................34

Operating Instructions

Operating Instructions .................................................34
Coding/Pairing of remote control transmitter with on/off 
switch ...........................................................................34
Lighting Procedure ......................................................35
Shutdown Procedure ...................................................35
Normal Operating Sounds of Gas Appliances .............36

Maintenance

Maintenance Instructions ............................................36
Copy Of Lighting Instruction Plate ...............................37
Proflame II Remote Control Operating Instructions 38-41
Door Glass  ..................................................................42
Pilot Adjustment ...........................................................43
General Vent Maintenance ..........................................43
Log Replacement ........................................................43
Glass Gasket ...............................................................43
Backup battery Pack ....................................................43
Fan replacement - with remote control ........................44
Valve replacement .......................................................45

Parts

LRI3E parts list ............................................................47
LRI3E Main Assembly .................................................48
HRI3E Parts list ...........................................................49
HRI3E Main assembly .................................................50
Accessories .................................................................51 

Warranty

Warranty ......................................................................53 

Dimensions

Unit dimensions with vignette faceplate ........................4
Unit dimensions with vignette faceplate
 + small backing plate ....................................................4
Unit dimensions with 4 sided vignette faceplate
 + backing plate .............................................................5
Copy of Safety Label HRI3E ..........................................6
Copy of Safety Label LRI3E ..........................................7
MA Code - CO Detector ................................................8

Installation

Important Message   ......................................................9
Before You Start .............................................................9
Important Message   ......................................................9
For Your Safety ..............................................................9
Specifications ................................................................9
Gas Pressure Testing ..................................................10
Installation Into A Solid Fuel Burning Fireplace 
Or Factory Built Fireplace ............................................10
Factory-Built (Metal) Wood-Burning Fireplace  
Requirements ..............................................................10
Installation Checklist ....................................................11
Materials Required ......................................................11
Minimum Fireplace Dimensions ..................................11
Minimum Clearances to combustibles .........................12
Gas Connection ...........................................................13
Alternate Approved Caps/Adaptor ...............................14
Standing pilot  ..............................................................14
Vent restrictor plate Installation ...................................14
Flue / vent installation ..................................................15
Air shutter Adjustment .................................................16
System with fan (LRI3E / HRI3E) ................................17
High Elevation ..............................................................18
Gas Line Installation ....................................................18
Pilot Adjustment ...........................................................18
Gas Pipe Pressure Testing ..........................................18
885 S.I.T. Valve Description .........................................18
Conversion from NG to LP  .........................................19
Media installation .........................................................21

All manuals and user guides at all-guides.com

Summary of Contents for HRI3E-LP1





























































Reviews:

No comments

Related manuals for HRI3E-LP1

Vanguard 0 Operating And Installation Manual preview
0
Brand: Vanguard Pages: 32
Harman Stove Company Harman Clarity 828i Installation & Operating Manual preview
Harman Clarity 828i
Brand: Harman Stove Company Pages: 23
Napoleon GSS36CFNE Installation And Operation Manual preview
GSS36CFNE
Brand: Napoleon Pages: 80
Classics FP35077 Manual preview
FP35077
Brand: Classics Pages: 68
Flavel FSBL**RN Installation, Maintenance & User Instructions preview
FSBL**RN
Brand: Flavel Pages: 52
RUSTA 90651095 Manual preview
90651095
Brand: RUSTA Pages: 26
ELEMENTI OFG105NG Owner'S Manual preview
OFG105NG
Brand: ELEMENTI Pages: 20
GlammFire KIT Glamm 3D L Manual preview
KIT Glamm 3D L
Brand: GlammFire Pages: 12
Lopi 95800251 User Manual preview
95800251
Brand: Lopi Pages: 11
Harman Accentra Owner'S Manual preview
Accentra
Brand: Harman Pages: 32
Hargrove DEI-PO Installation Manual preview
DEI-PO
Brand: Hargrove Pages: 6
Hargrove GAS LOGS Installation And Operation Manual preview
GAS LOGS
Brand: Hargrove Pages: 11
Paromax EUROPA 75 User & Maintenance Manual preview
EUROPA 75
Brand: Paromax Pages: 36
Nibe Contura C610 Style Manual preview
Contura C610 Style
Brand: Nibe Pages: 20
GRAND EFFECTS 42" Legacy Operating And Maintenance Intructions preview
42" Legacy
Brand: GRAND EFFECTS Pages: 11
EDYO LIVING ZHX-23-040 Use And Care Manual preview
ZHX-23-040
Brand: EDYO LIVING Pages: 11
Endless Summer GAD1380SP Owner'S Manual preview
GAD1380SP
Brand: Endless Summer Pages: 20
climacity Biochimenea Pur Line Selene Manual preview
Biochimenea Pur Line Selene
Brand: climacity Pages: 4

Brands by name

Popular brands

Load more brands