40
Regency Bellavista™ B41XTCE Gas Fireplace
INSTALLATION
Location of back
tabs on Burner
Tab on Burner
Tab on Burner
Back of Log H
Back of Log G
Notch - Log H
Burner Grate Tab
6
) When Log F and I are in position - make sure they positioned all the
way back and touch the tabs on the burner as shown below.
7)
Place Log G on the left front side of the burner in front of log I.
Position Log G so it fi ts into the pin on the burner as shown below.
8)
Slide the left side of Log G back until it touches the tab on the burner
shown below.
10)
Slide the right side of Log H back until it touches the tab on the burner
shown below.
I
G
H
9)
Place Log H on the right front side of the burner in front of log F.
Position Log G so it fi ts into the pin on the burner as shown below.
There is a notch on the bottom of log H - position the log so the notch
fi ts over the 5th burner grate tab as shown below.
H
5)
Place Log I on the left side of the burner, directly in front of Log A.
Position Log I so it fi ts into the pin on the burner as shown below.
I
F
