Regency Bellavista™ B41XTCE Gas Fireplace
61
MAINTENANCE
1) Shut off electrical supply.
2)
Remove Full Screen Door and bottom Louver if installed.
3)
Remove the glass door - see instructions in manual.
4)
Remove the logs, lava rock and vermiculite if installed.
5)
Remove the brick or inner panels if installed - see instructions in manual.
6)
Remove the burner and rear log tray - see below.
Diagram 1: Remove the left and right screws.
Diagram 2: Slide burner assembly to the right
and then remove.
8)
Remove the 2 screws securing the rear log tray and lift out. Diagram 3
Diagram 3
7)
Slide the burner assembly to the right to release it from the orifi ce,
then lift it out.
9)
Remove the 2 screws securing the base tray - lift base tray up and
out. Diagram 4a and 4b.
Diagram 4a
Diagram 4b
10)
Replace the bulbs as necessary.
Note
: Oils from hands will shorten the life of the bulbs,
do not handle bulbs with bare hands.
11)
Reverse steps 9 - 1.
Base Tray
ACCENT LIGHT BULB REPLACEMENT
