No Diving or Jumping. Observe all Safety Rules
1-7
i.
Go over the entire perimeter of the pool to ensure
that at every 3“ the surface is completely level.
j.
Lay out the bottom rails and bottom plates around
the circle.
k. Check the roundness of your circle, by measuring
the diameter across in several locations. Since the
bottom rails do not automatically form a true circle,
DO NOT SKIP THIS STEP!
Otherwise you might end
up with a slightly oval shape, which can cause
problems later on.
(Image 10)
l.
Verify the height of each bottom plate with an
optical level. They have to be at the same height.
Adjust height if necessary.
B. CONT. PREPARE THE FOUNDATION OF YOUR POOL
GENERAL INSTRUCTIONS - ROUND POOLS
GROUND PREPARATION
Section
1
10
11
