Regin product information
Regin product information
X9017
Option card, EIB
• Makes logic, calculation and control functions
possible for an EIB network
Communication card for EIB and KNX networks, for
internal mounting in an EXOflex house etc.
• For applications where EP7408, EP8101 or EP8102
are installed
• Suitable for controlling lighting etc. over EIB
Option X9017 is a plug-in card for serial communication
on the EIB bus. This interface has no galvanic isolation
from the rest of the internal electronics.
The option occupies Port 2 or Port 3 in EXOflex, and
Port 3 in other controllers. The maximum cable length
is 3 meters. It is important that the cable is placed away
from power cables.
See the EIB manual for more information.
The figure below illustrates the connection of an EIB bus
connector, BCU, to EP8101/EP8102. The DTR output on
EP8101/EP8102 cannot be controlled from software but
is internally connected to +12 V.
revision
08 2007
