33
│
Sentinel Kinetic Advance S, SX - www.regulus.eu
Service Phone
The Service Phone screen enables the installer to
enter the telephone number that should be called
for service in the event of a unit fault or for routine
maintenance.
Enter the number using the buttons on the screen,
Scroll through the number using the
buttons
Set Lock Code
Set the lock code using the buttons on
thescreen, press OK to save the code.
Note: Default code if not set at this point will be
0000.
Commissioner Menu
Once the commissioning settings have been
modified exit to the commissioning menu.
Settings are stored in a non-volatile memory and will
be retained irrespective of mains supply breaks,
however, the unit can also be restored back to
factory defaults at this screení.
Press
EXIT
to return to the User Menu Home
screen.
To complete the setup process, press the
EXIT
button.
If a USB device is present, the settings from the unit
can be saved and used for the setup of similar units.
Restore Defaults
To return the unit back to factory settings press the
Restore Defaults button. A confirmation screen will
appear. Press
YES
to confirm, or
CANCEL
to return
to the Commissioning Home screen.
Once confirmed the following screen will appear, the
restore process takes approximately 5 seconds.
Press
CANCEL
to stop the restore process during
this time.
Once the system has restored back to factory default
settings it will go back to the start up screens.
/
-
