11
│
14. Fit the solar pump station (code 14866) using 2 screws M6x16 and washers (codes
12996 and 7853) - all these components are included in the Kit code 12227.
15. Connect the solar pump station to the tank using the respective Kit (code 12227). Prior
to
fi
tting, cut the insulation to length and slide it onto the pipe. Fit the solar sheath.
SHEATH
16. Stretch the pipes to the below listed preliminary lengths, cut the insulation and slide
it onto the pipes (included in the Kit code 12226):
−
one 1” pipe (code 11271) to 410 mm, insulation to some 500 mm
−
one 1” pipe (code 3016) to 250 mm, insulation to some 300 mm
−
one 3/4” pipe (code 3041) to 450 mm, insulation to some 550mm
−
one 3/4” pipe (code 3041) to 320 mm, insulation to some 400 mm
−
one 5/4” DN25 pipe (code 13484) to 580 mm, insulation to some 700 mm
