19
│
7 - Mounting insulation onto the tank
Product description
Thermal insulation is a part of Thermal Stores that prevents heat loss. For these Thermal Store
models, the insulation is delivered separated for easier handling and needs to be mounted on the
spot. The insulation consists of 3 layers: the
fi
rst one is soft insulation
fi
tting tightly on the tank; the
second, main layer, features thermal conductivity l=0.032 W/m.K; the third layer is a hard, glossy
washable surface. The total insulation thickness is 100 mm.
Caution
Insulation mounting shall be done in two or three persons, depending on its size.
It must be done
at temperatures of at least 20 °C
. If this cannot be respected, the insulation shall be pre-warmed
in another room to at least 20 °C. It is impossible to install insulation under lower temperature,
there is a risk of damage. Do not use any tools for installation.
Keep away from open
fi
re.
Warranty on insulation
□
Warranty shall become null and void if:
○
the procedure described in the Installation Manual was not respected,
○
the product was used for other purposes than intended.
□
Warranty does not cover:
○
usual wear and tear,
○
damage caused by fire, water, electricity or a natural disaster,
○
defects caused by failure to use the product in compliance with its intended purpose,
by improper use and insufficient maintenance,
○
defects caused by mechanical damage to the product,
○
defects caused by tampering or incompetent repair.
8 - Maintenance
If the tank is
fi
tted with a heating element, disconnect it from the mains
fi
rst. Clean the exterior of
the tank with a soft cloth and a mild detergent. Never use abrasive cleaners or solvents
Check all connections for leaks.
9 - Disposal
Packaging shall be disposed of in compliance with the valid rules. When the product reaches the
end of its life, it shall not be disposed of as household waste. It shall be dropped off at a Local
Waste Recycling Center. Insulation shall be recycled as plastic and the steel vessel as scrap iron.
10 - Warranty
This product is covered by warranty under the conditions listed in this Manual and in compliance
with the Warranty Certi
fi
cate. A Warranty Certi
fi
cate is an integral part of this Thermal Store scope
of supply.
