(A)
(B)
( )
( )
( )
( )
( )
( )
( )
( )
( )
( )
( )
HOW TO SET UP THE FLEXION
AND EXTENSION IN
2RP SPLINT - INSTRUCTION
2RA PRECISION SPLINT is equipped with the following ROM adjustment
flexion (A)
in the scope of: 0
0
, 10
0
,
30
0
, 40
0
, 60
0
, 75
0
, 90
0
and
extension (B)
in the scope of: 10
0
, 20
0
, 30
0
, 40
0
.
fig.2
fig.1
1. Position the brace in the approximate position where you want to limit the
flexion/
extension
(fig.1)
2. Drive the screw/bolts into the hole marked with the appropriate angle value and check the correct
operation and the range of clock movements
(fig.2)
ATTENTION:
If the brace is equipped with 2 side splints, adjustment is done on each side splint separately
setting the same angle of flexion and extension. Side splints do not require maintenance.
THE ANGLE OF FLEXION AND EXTENSION IS SPECIFIED BY THE DOCTOR
OR PHYSIOTHERAPIST!
REH4MAT
Ul. Piaski 47, 36-060 Głogów Małopolski | Polska
tel. +48 16 62 142 20
Fax +48 16 62 21 42 13 e-mail: biuro@reh4mat.com www.probraces.com www.reh4mat.com
©Reh4Mat 10/2021
