a
b
1
2
3
1
2
OK!
3
1
2
OK!
a
3
b
Click!
Page 1 (1)
User manual /
Assembly instructions
MANUFACTURER: Hantverksdesign & Rehabiliteringsprodukter AB
Tryffelslingan 4, SE-181 57 Lidingö, Sweden
tel. +46 8 767 04 80
fax. +46 8 767 50 00
www.hdrehab.se info@hdrehab.se
Rev. A
Latest revision: 2012-04-05
Art.no. 95824-1
Knee joint - releasable
HD Balance
Art. no.: 62733-5 and 62734-5
- The knee joint shall always be locked except when adjusting the angle of the legrests. If
it's left unlocked, the structure can be damaged.
!
Parts included:
62733-5 Knee joint releasable left
62734-5 Knee joint releasable right
Mounting
This knee joint is mounted in the same manner as the standard knee joint.
Use
Follow the instructions below when using the releasable knee joint.
Care instructions
Wipe with soap and water when needed. For further information, see the Maintenance Instructions 95730-1.
1 (a, b) Push and turn the knob counterclockwise. Now the knee joint is unlocked.
2. Adjust the leg- and footrest by unlocking the opposite knee joint in the normal way.
Always hold the legrest securely when doing this adjustment. When the knob is unlocked the leg- and
footrest fall down immediately when the button on the standard knee joint is pushed.
3 (a, b). Return to the releasable knee joint. Make sure that both knee joints are set at the same angle. Turn
the knob clockwise. Pull the legrest a bit so that the knob clicks out to its outer position.
!
