background image

 

10/15 

Rehability Reha-Fachhandel GmbH 

page 5 of  15 

 

Rehability Reha-Fachhandel GmbH & Co. KG 
Am Taubenfeld 39 
69123 Heidelberg 
Tel.: 06221 70 54 - 0 
Fax: 06221 70 54 - 498 
Mail: myslave@rehability.de

 

Rehability Reha-Fachhandel GmbH  
Am Taubenfeld 39 
69123 Heidelberg 
Tel.: 06221 70 54 - 0 
Fax: 06221 70 54 - 498 
E-Mail: info@rehability.de 

 

 

 

1.

 

Advice and safety features  

 

 

 

 

 

Congratulations for having selected MySlave Rehability’s traction device. We appreciate your trust 
in our product. For more information how to use it, including photo and video material regarding 
lifestyle and excursions, check out our homepage (www.rehability.de) or visit us on YouTube 
(Rehability GmbHundCoKG). 

1.1.

 

Advice 

 

 

 

 

 

 

 

 

 

Please thoroughly read this manual concerning MySlave before using device. This manual 
contains relevant information how to best maintain traction device, as well as safety features 
on how to best avoid accidents. It tells you how to keep MySlave in optimal working condition. 
Your retailer offers anything you may need with regard to potential replacement. Therefore he 
is able to advice you in the best way and to follow the maintenance plan recommended for 
MySlave, so you can enjoy more driving pleasure with maximum safety. This manual goes along 
with the pulling device and in case of sale, needs to be transferred to new owner. In the 
context of product improvement, Rehability reserves the right to remove, change or add 
information.  
 

The device meets product requirements, norms and standards by EU as confirmed in the 
corresponding certificate of conformity. 

 

1.2.

 

Safety features   

 

 

 

 

 

 

Important information to avoid accidents: 

The following information is for your own safety. 
Please read carefully before commissioning MySlave! 

 

 

MySlave has been approved for a maximum speed 15 km/h. We advise not to exceed this 
speed limit. 

 

On a downward slope, we recommend to use significantly lower speed to slow down 
safely in every circumstance.  

 

The maximum added weight for MySlave lies at 100 kg. Make sure to consider maximum 
added weight indicated by wheelchair manufacturer. If indicated lower than 100 kg, the 
lower number in question applies. 

 

To prevent accidents, always keep both hands at steering wheel when driving and 
putting on the brakes. 

 

When driving at dawn and night, always make sure to be using optimal lights.  Attach rear 
light(s) on back tubes or on rear side cover of wheel chair. Before driving, always check 
batteries of all lights and make sure to recharge / replace in time. 

 

 

Retail advice: 

Always include this manual when handing out MySlave  to buyer. Make sure to draw 
attention of buyer to safety features.  D o   n o t   d e l i v e r   MySlave without 
manual! 

Summary of Contents for MySlave
















Reviews: