10/15
Rehability Reha-Fachhandel GmbH & Co. KG
Seite 9 von 15
Rehability Reha-Fachhandel GmbH
Am Taubenfeld 39
69123 Heidelberg
Tel.: 06221 70 54 - 0
Fax: 06221 70 54 - 498
E-Mail: info@rehability.de
Rehability Reha-Fachhandel GmbH & Co. KG
Am Taubenfeld 39
69123 Heidelberg
Tel.: 06221 70 54 - 0
Fax: 06221 70 54 - 498
Mail: myslave@rehability.de
4.
Description of MySlave
MySlave comes with a propulsion unit, which – given its U-shaped frame – is easily adaptable to a variety
of wheelchairs. You can attach the individually configurable adapter of MySlave directly to front tubes
of wheelchairs with integrated foot pegs.
For wheelchairs with removable foot pegs we recommend to use a cranked adapter unit. This will allow for
simpler adjustment of MySlave, at a higher point.
A coupling technology especially designed for MySlave will automatically lift steering wheels by
approximately 40 mm to then position them. Your wheelchair will now be in a position to be pulled or to
be moved backward with reduced speed.
The U-shaped adapter unit is perfectly adjustable to the width of your wheelchair. The same applies to
the angle of frame concerning front frame tubes / feet handles. Tilt of adapter unit follows from required
leg freedom (>30mm) of wheelchair steering wheel.
This guarantees individual adaptation to wheelchair in question.
The multifaceted adjustability of complete propulsion unit makes switch to other tested wheelchair
models possible.
(See attached overview.)
This may require an exchange of mounting blocks / main mount, and in case of change of width the
replacement of U-handles.
Given the circumventing frame construction of adapter unit, lower legs and feet of driver will be
optimally safeguarded and protected.
