Version 10/21
Page 10 of 49
PAWS UM EN
Part name
Control type
Control frequency
Device
Battery and Charger Ensure the battery contact points and housing are clean by wiping with
a dry cloth. Further, check that the plug and battery socket for
charging are clear of any dirt or metal particles.
When recharging the
battery
Brake Levers
Brake cables may stretch over time. These can be adjusted by
loosening the lock nut and turning the adjustor next to the brake lever
housing. Retighten after adjusting.
As indicated through use
Handlebars
Check tightness of all fasteners on the handles bars to ensure stability
of parts. Only use the tools supplied.
Depending on use, and/or
monthly
Lights and Horn
Normal function check
Before every use
Disc Brake Assembly Clean the Brake Disc thoroughly and check for excessive wear such as
gouging or deep grooves.
When braking
performance feels
diminished, or monthly
Clamping Mechanism
to Chair Frame
Check adjustments in case of slipping or excessive markings on the
tube, or manual clamping becomes harder or easier than when first
delivered.
As indicated
Clamping Mechanism
to Device Frame
Check tension and adjust to ensure a firm grip on the Width Adjusting
Rods.
As indicated, especially
when changing to
different chairs
Common to both Chair and Device
Pneumatic Tyres
Tyre pressure (check manufacturers specifications), condition of tread
and tyres. Take care to keep the same level of pressure in all tyres.
Harder tyres provide better maneuverability and easiness of driving
but reduce comfort on bumpy surfaces.
At least once a week; see
manufacturers
“Specifications”
Spokes
Loose spokes can cause deformation of the rear wheels. Contact your
Distributor or local bicycle service center to manage the problem of
loose spokes.
If the problem occurs
Chair only
Push Rims
Excessively scratched push rims should be replaced to lower the risk of
injury to the U
ser’s hands
during use.
If necessary
Brakes
Braking force depends on tyre pressure. Brake operation efficiency can
also be affected by dirt accumulated on tyres. Keep the brakes clean
by wiping them with a damp cloth.
At least once a month,
depending on usage
conditions
Frame and Rear Axle
Mount
Depending on the patterns of use and the possibility of abnormal use
and wear, check all frame welds, axles, back canes, and seat mounts for
evidence of cracking or other damage. Attention! If identified, suspend
all use until damage is rectified.
At least once a month,
depending on usage
conditions
