Version 10/21
Page 26 of 49
PAWS UM EN
•
Stand and support the Device on its wheel. Rotate the Support Legs outwards to support the Device in
the standing position. Ensure the locating bolts at the top of the Supporting Legs are clearly in the key-
way slot.
Figure 15. Rotating the Support Legs to the Park Position
•
Press the Lift Lock Lever on the handlebar and pull back the Support Legs to the Park position so the
Device can stand freely.
•
Attention!
“Park” is the position required for docking and un
-docking during the clamping steps.
Figure 16. Different positions for the Lift Mechanism
(See Section 13
“
Operating
”
for more information on driving positions)
•
Set the Handlebars. Rotate the handlebars into the correct driving position. Tighten the four hex bolts in
the holding bracket to prevent unwanted movement of the handlebars.
Attention!
The recommended Torque setting for these bolts is 8 Nm (Newton Meters).
Figure 17. Fixing the Handlebars in the Operating Position.
