05/2020
Strona 11 z 23
Icon 60 Vario S
Symptoms
Possible cause
What to do?
The wheelchair seems
to tilt on one side
One of the rear tyres might be
inflated more than the other one.
Inflate tyres (4,0-6,5 bar).
Check displacement of the wheelchair mass
The wheelchair is hard
to push
Low air pressure in tyres.
Front wheels axles are dirty.
Too large load applied on the front
turning wheels.
Inflate tyres (4,0-6,5 bar).
Remove dirt.
Balance the weight.
The wheelchair is hard
to turn
Low air pressure in tyres
The front wheels are tied too strong
Front wheels axles are dirty.
Inflate tyres (4,0-6,5 bar).
Check the front wheel axles and loosen them if
necessary.
Remove dirt and clean the front wheels.
Brakes are not
working correctly
Low air pressure in tyres
Inflate tyres (4,0-6,5 bar).
It is hard to fold and
unfold the wheelchair
The upholstery fitted to tight
The frame cross hinge is dirty
Adjust the tension of the upholstery support
belts. Remove the seat cushion.
Clean up and lubricate the crossbar hinge.
The wheelchair is not
stable
Low air pressure in tyres
The elements of wheelchair aren't
rigid and tight
Inflate tyres (4,0-6,5 bar).
Ensure that all screws and nuts are tightened.
Flat tyres
Possible puncture of tube & tyre
Tyre and tube are worn down
Contact your nearest wheelchair dealer or
bicycle service to repair or replace broken tubes
and tyres
In case of any product failure we recommend you contact an authorized service agent or the dealer the wheelchair was
purchased from. The manufacturer does not warranty proper functioning of the device if it has been repaired by
unauthorized service and/or not using original spare parts.
WARNING! We recommend servicing the wheelchair only at authorized service centers.
WARNING! Unauthorized repairs will cause loss of warranty.
Authorized services
For authorized repair you should contact the dealer where product was purchased or contact the manufacturer
directly..
8. Transport & Storage
Transport recommendations
The ICON 60 is easy to transport. It can be folded and removed to reduce size and weight. It is possible to detach the
rear wheels and to fold the chair's cross frame very easily as was described previously.
WARNING! The wheelchair is not a car seat. When travelling in vehicles sitting in the wheelchair is prohibited.
The chair should be folded and safely immobilized.
Procedure of sending the wheelchair or parts to be serviced
To repair the wheelchair, one should contact the local dealer or the manufacturers’ service. The wheelchair or parts
ought to be sent in a package protecting it against incidental transportation damages. The best solution is to use the
original packaging. The dispatch ought to be organized through the transporting company indicated by the
manufacturer.
WARNING! The manufacturer does not take responsibility for transport damages of the device or components
caused by improper packing.
Storage
Store device in dry place, where temperature is not freezing. The chair can be folded to reduce space needed for
storage. You can also detach rear wheels to save even more space. Freezing temperatures or humidity may cause
damages on tyres, fabric, axles, bearings and other elements of the product. To protect tyres against deformation
during long period of storage you can place wood bricks or other supports under the frame. It is also recommended to
cover the chair to protect it from dust and dirt.
