05/2020
Strona 20 z 23
Icon 60 Vario S
14.2.6. Adjusting the angle of the backrest
Backrest angle adjustment is smooth. The adjustment method is described below.
For the best driving parameters, the backrest should be
set vertically in relation to the ground.
To adjust the backrest angle it is necessary to:
•
Holding the 2 nuts (2), loosen the 2 screws (1)
securing the backrest locks on both sides of the
frame.
•
Holding the nut (3), loosen the screw (4)
•
Back support.
Do the same on the other side of frame.
•
Set the desired back angle (5).
•
Then, holding the 2 nuts (2), tighten the 2 screws (1)
that fix the backrest locks on both sides of the frame.
•
Holding the nut (3), set and tighten the screw (4) Back
support.
Do the same on the other side of frame.
Check the backrest lock mechanism again pulling the
cord. Make adjustments if necessary.
2
1
90
°
3
4
5
