05/2020
Strona 6 z 23
Icon 60 Vario S
5. Usage
Lifting the wheelchair
The wheelchair with a load should only be lifted behind the rear axle and side frames marked in
the drawing below:
WARNING! It is forbidden to move the wheelchair with a load by the footrests, armrests or
folding handles (option).
Techniques to get in and out of the wheelchair
Teaching techniques of transferring the User must be done under the strict supervision of qualified
staff. We only present our recommendations below.
Transferring the User from the wheelchair to the bed
The User should face the bed without regard on the fact if
the other person helps or not. Drive the wheelchair as close
to the bed as possible and ensure, that front wheels are
facing towards. Pull the brake, lift the armrests / side panels
on his side of the wheelchair, on which the transfer to the
bed will take place
Transferring the User from the bed to the wheelchair
The User should face the bed without regard on the fact if
the other person helps or not. Drive the wheelchair as close
to the bed as possible and ensure, that front wheels are
facing towards. The Attendants should use mainly the
strength of muscles of legs to draw the wheelchair on stairs
avoiding the excessive bending down and impairing the
muscles of backs.
Driving the wheelchair
The correct weight distribution is a basic element of proper wheelchair usage. The correct
wheelchair operation depends not only on weight but also on body proportions, the position of the
person seating in the wheelchair and the position of the rear wheels. The larger the weight
proportion of the User resting on the rear wheels the easier it is to propel. The larger the weight
proportion of the User resting on the front wheels the harder it is to propel the wheelchair.
WARNING! Always ensure, that the brake is applied, when the Attendant is leaving the
1
2
