Issue 01/2019 4/6 SERVER W
We recommend you follow the steps below:
Initial Check
- In the first instance take the device out of the box and check (using the picture above) that
nothing is missing. If you discover at this stage that some part is missing or damaged do not
continue to assemble the product. Contact your supplier of the product right away.
Opening of the rollator
• Push the red button which is locking the seating tubes
• Hold both seat tubes and simultaneously push them down until you
hear a click sound of the locking mechanism of the frame. Try to
pull the seat tubes back up to fold the frame. If this is impossible to do
the frame is opened and secured correctly. See the OPEN position in
the picture above.
•
After unfolding or assembling the rollator always ensure that the seat support is securely
locked by the pulling strip mechanism for securing the lock and that the frame does not move
anymore.
•
Always ensure that both push handle tubes are securely locked in the main support tube with the
two wing knobs to prevent the accidental sliding in of the push handle tubes when forced.
•
Always test to see that accessories are properly and safely locked in place BEFORE using.
•
Failure to follow these warnings can result in personal injury.
Folding
- Lift the pulling strip on the seat up to fold the rollator.
- Fold the rollator until the red button locks.
Adjusting the height of the forearm supports
- Release the height locking knob,
- Make adjustment to your desired height.
- Tighten the knob.
•
Both supports should be adjusted to the same height.
•
The correctly adjusted underarm supports should be located on the height of user s elbows
when standing with arms directed downwards.
Adjusting the length of the push handles
- Release the handle s length locking knob,
- Make adjustment to your desired length, so it is easy and comfortable to grab the handle.
Tighten the knob.
Using the hand brakes
- TO STOP THE ROLLATOR simply pull the brake handles up towards the hand grips.
- TO REMAIN STATIONARY hold the brake handles in the UP position.
- TO START MOVING release the brake handles. They will drop down automatically and the
brakes will be released.
•
You should always engage the breaks when you don t plan to move the device.
•
Never leave the device without the breaks engaged when there is someone sitting in it!
•
Never leave the device on slopes without the breaks engaged!
• Never sit too much to the rear. Do not to sit (partly) above the shopping bag.
•
Always sit straight up when seated on the rollator with your forearms or hands lightly resting on
the push handles.
•
Never lean backwards when seated on the rollator.
•
Never leave unattended device without the breaks on.
