34
Keep in Mind these Rules:
•
Fully charge batteries at least once a month, or more if you use scooter regularly.
Charge after each trip exceeding 3 kilometers.
•
If storing your scooter for some time (1 month or more), make sure that batteries are
fully charged, and on returning, charge them again before using scooter.
•
Batteries will only give maximum performance after scooter has been used, and
batteries have been recharged up to 10 times. A bit like breaking in a new car.
Please be aware that the travelling range of your mobility scooter is impacted by how fast
the batteries are discharged. This will depend on many circumstances, such as ambient
temperature, condition of the surface of the road, tyre pressure, weight of the driver, driving
environment (inclines etc.) and utilization of your lighting system if fitted. We recommend
that you test your local ride with a family member to ensure a safe journey.
7. Disassembling your Scooter:
I.
Seat disassembling:
Remove seat by lifting Seat Rotation Lever (J). Then rotate Seat (K) and lift up
away from scooter.
II.
Battery Pack disassembling:
As indication, pull Battery Pack Handle (R) to remove Battery Box (S) from scooter.
Caution: Battery Box is heavy. When lifting, please use correct lifting posture to
avoid injury. Ask for assistance if necessary.
When assembling Battery Pack (T), make sure to aim for the battery terminal connection
for proper electricity conductivity.
III.
Front & Rear Frame disassembling:
Hold front & rear frame with Release Lever (T) to disassemble front and rear frame.
Tiller fold method:
Turn the Cap (I) to fold down the Tiller (U) to the lowest position. When the Tiller (U) is in the
lowest position it can be locked by the pin of tiller angle adjustment.
Completion of disassembling:
The Scooter can be disassembled into 7 main parts.
Re-assembling your scooter by vise versa above disassembling procedures.
GB
