40
11. Error code:
Flash
Description
Initial checkpoints
1
Battery low
The batteries are running low.
•
Recharge the batteries.
2
Low Battery Fault
The batteries have run out of charge.
•
Recharge the batteries.
3
High Battery Fault
Battery voltage is too high. This may occur
if overcharged &/or traveling down a long
slope.
•
If traveling down a slope, reduce your
speed to minimize the amount of re-
generative charging.
•
Check the battery and associated
connections and wiring.
4
Current Limit Time-out
The motor has been exceeding its maxi-
mum current rating for too long. This may
be due to a faulty motor.
•
Check the motor and associated
connections and wiring.
•
Turn the controller off, leave for a few
minutes and turn back on again.
5
Park Brake Fault
Either a park brake release switch is active
or the park brake is faulty.
•
Check the park brake and associated
connections and wiring.
•
Ensure any associated switches are in
their correct positions.
6
Throttle
The Throttle is out of neutral when turning
the controller on.
•
Ensure the throttle is in neutral when
turning the controller on.
•
The Throttle may require
re-calibration.
GB
