REHASHOP Zebra KREHA-2070, Instruction Manual

12

at

ch

A L L E S   W E E R   Z O   G O E D   A L S   V R O E G E R

verpleeg-

nl

Instruction manual lightweight wheelchair

Item No.: KREHA-2070

The “Zebra” lightweight wheelchair is used to trans-

port people in a sitting position, whether in the 

household, when shopping, or when travelling.

The wheelchair is equipped with removable 

footrests and a holding brake. Additionally, the 

lightweight wheelchair features a drum brake 

for the wheelchair user’s companion as well as 

quick-release axles to enable rapid removal of the 

rear wheels. As the wheelchair can be folded, it 

can be transported in a car and/or stowed away to 

save space.

We hope you enjoy using the REHASHOP “Zebra” 

lightweight wheelchair and hope that it will enable 

you to gain greater mobility.

1 

Push handles and handbrake  

  for 

companion 

  2 Armrests

3 

Leg supports

4 

Propulsion wheel

5 

Hand rim

6 

Quick release axle

7 

Tipping protector with 

  tilting 

aid

8 

Holding brake

9 

Guide wheel

  10 Footrests

Assembling the wheelchair

Ensure that the wheelchair is complete and assem-

ble the wheelchair in the following order:

- Unfold the frame as shown and describe in the 

  section headed “Unfolding the wheelchair”

- Attach the back and seat cushion to the wheel-

  chair. For a description, see “Removable back and 

  seat cushion.”

- Attach the footrests as shown in the section entit-

  led “Attaching and locking the footrests.”

Unfolding the wheelchair

Press down on the seat 

frame. The chair will un-

fold itself. Now push the 

seat frame into the sup-

ports. This step is easier 

of you tilt the chair a little, 

thus lifting some weight 

off the propulsion wheel. 

Check that the seat frame 

is properly engaged with 

the seat and that the seat is flat.

Folding the wheelchair

First remove the leg 

supports and the seat 

cushion. Now grip the 

centre of the seating 

surface from below and 

pull up. The chair will 

fold up and, if required, 

the backrest is also 

collapsible.

Folding backrest

It is possible to reduce 

collapse the backrest to 

reduce the height of the 

wheelchair if required. 

Push the two black levers 

on the back of the chair at 

the same time. The folding 

mechanism will unlock and 

the backrest can be folded 

down.

Important: 

Ensure that the backrest is fully 

unfolded and locked in place before using the 

wheelchair.

GB