CONTROLS AND INDICATORS
1. Power On/Off Button
2. Band Selector
3. Radio Station Tune/Seek Buttons
4. LCD Display
5. Radio Status Display Button
6. Radio Station Scan Button
7. MODE Select Button
8. Auto Store Preset Radio Stations Button
9. Front 3.5mm Auxiliary Input Jack
10. Volume/Select Knob
11. Preset Memory/Recall Button
12. US/EURO Band Select Switch (Not Shown)
REI Audio System
REI Audio System
(14) US/EURO Band Select Switch
If you wish to take the receiver out of the country, the tuner frequencies and
interval can be switched to the following regions:
USA:
FM: 87.5-107.9 MHz (0.2 MHz step)
AM: 530-1710 kHz (10 kHz step)
Europe:
FM: 87.50-108.00 MHz (0.05 MHz step)
AM: 522-1620 kHz (9 kHz step)
This option also changes the clock display from 12 hr (USA) to 24hr (European).
***
For changes to the EURO/USA switch to take affect, the 12v battery
power must be cycled to reset to the new settings.
NOTE:
For easy viewing at night, the backlighting will always be on when ACC +12V
switched power is applied. Backlighting will only shut off when the switched
ACC +12V power is removed.
Additionally, this unit features ANY KEY POWER ON function. Touching any
key will turn ON the unit. The unit can be turned back OFF with the POWER
button.
INSTALLING THE RADIO
1. First put the DIN collar into the hole opening, then, use the screwdriver to bend the
tabs outward as shown on the drawing below.
2. Insert the radio in the DIN collar.
3. Affix the rear mounting stud to the rear mounting bracket (option).
