THE DIGITAL RADIO
(1) Power On/Off Button
Press the Power Button to turn ON or OFF the unit.
(2) Band Selector
Press this button to change radio bands as follows:
FM1—FM2—FM3—AM1—AM2
(3) SEEK Buttons
Under Radio mode, press these buttons momentarily to manually tune to the
desired station moving upward or downward. Press and hold these buttons and
the radio will automatically seek the next available radio station.
(4) LCD Display
Time or Radio display can be changed by press the DISP button. It will return
to time display automatically after 3 seconds.
(5) Display Button
Press this button to change between Time and Radio status display. It will
return to time display automatically after 3 seconds.
Setting the Time.
Press and hold the display button until the hour display begins to flash.
Rotate Volume/Select Knob to adjust the hour. Press the display button again,
and the minute display will flash. Rotate Volume/Select Knob to adjust the
minute. Press the display button again to exit this menu.
(6) Scan Button
Under radio mode, press this button to scan to the next stations. It will stay at any
available station for 5 seconds and then scan to next available station unless
interrupted by the user. While the scan is in process, the display will return to
TIME display after 3 seconds. You can return to radio status by pressing the
DISPLAY button at any time.
(7) MODE Button
Press this button to change input mode as follows:
Radio—AUX—Radio
REI Audio System
REI Audio System
(8) Auto Button
Press and hold this button to auto memorize the next available stations into the
preset memory buttons. This function will erase previous memorized stations and
store the newly searched stations.
(9) Auxiliary Input Jack
The unit is equipped with a front panel 3.5mm auxiliary input so you connect
your external portable audio player or portable satellite radio receiver. On the
rear of the unit, there is a pair of RCA inputs to connect an additional auxiliary
source.
(10) Volume/Select Knob
Rotate the knob Clockwise or Counterclockwise to change the volume level.
Press the knob to rotate through the following functions:
VOL---BAS---TRE---BAL---FAD
Upon choosing the function, rotate the knob to adjust the desired setting.
PLEASE NOTE: If the Volume/Select Knob has not been adjusted for 3 seconds
it will automatically revert back to volume function.
Menu Operation
Press and Hold for more than 3 seconds to choose. Once active, rotate the
volume knob and click to select
*DSP OFF/FLAT/CLASS/ROCK/POP
-selects Pre-Set EQ curves
*Seek 1/2
-selects Local (Seek1) Distance (Seek2)
*Clock 12/24
-select 12/24 hours clock
*Vol Last/Adj
-selects last position or Pre-Set position
(11) Preset Memory/Recall Buttons
Under Radio Mode
Press these buttons momentarily to select the preset stations.
Press and holding a button will preset the current radio station to the button being
pressed.
.
