E10
Camera with international camera back,
format 4”x 5”
Accommodates traditional double film-holders for
plates and film, 9x12 cm or 4x5, and the Polaroid
cut-film holder Model 545, by means of an
international spring camera back.
In use, the frame of the spring-loaded frame is lifted
slightly, and the film holder is inserted between the
camera housing and the frame.
The ground-glass focusing screen has a diagonal
blank strip. A Fresnel lens screen is available as an
accessory. A fold-out light shade is also available as
an accessory for shielding the ground-glass or
Fresnel lens from ambient light.
The Graflex Polaroid Roll Film Cassette, 3 1/4” x 4
1/4" or the Roll Film Cassette "Super Rollex" 56 x
72mm can only be installed after removing the
spring back. The two springy levers, which are
located on the removable spring back, are pressed
down, and the frame slid slightly to the side for
removal. The roll film cassette is fastened with the
two slides labeled "off". To adjust the image when
working with the Graflex Polaroid Roll Film Cassette,
a special Matte Screen Adapter is supplied as
required.
Camera with Polaroid pack-film cassette,
format 3 1/4” x 4 1/4”
The handling of the Polaroid pack-film cassette is
described in the enclosed operating instructions.
During removal of the camera body from the
microscope stand, an aperture in the camera body is
automatically closed, which prevents an exposure of
film already inserted.
Summary of Contents for Univar
Page 1: ...Reichert Univar Manual...
Page 2: ......
Page 48: ...D6 blank no content...
Page 58: ...E2 blank no content...
