PAGE 44
OPERATOR’S MANUAL ULTRA GUIDANCE PSR ISO
CHAPTER
OPERATION
Selection of speed sensors
Advice!
Depending on the current speed sensor, one of
the adjacent images will appear.
The speed type is used to set which signal should be used to
detect the current speed.
If the speed is currently detected by the vehicle/radar sensor,
select
and confirm the selection.
If the current speed is being detected by the GPS receiver or ISO
bus 11783, the menu will switch directly to the selection menu
for the speed signals.
Press the function keys
,
to set the speed type.
Press and hold the function key
until the stored symbol
appears. Proceed as described in chapter 4.12.
Picture 58:
Selecting the menu
Picture 59:
Selecting vehicle speed
