PAGE 80
OPERATOR’S MANUAL ULTRA GUIDANCE PSR ISO
CHAPTER
PSR SKY
5.6.
Working with a stored mode
Choose
and confirm the selection.
Choose
and confirm the selection.
Select the desired reference line in the mode and confirm the
selection.
For
or
, proceed as described in the associated
chapters.
Advice!
Check the working width set in the system, as
the selected job may contain another working width.
In order to ensure the maximum working accuracy of PSR SKY,
drive to the first track at which you wish to begin working and check
if there is a discrepancy from the target track.
If there is a discrepancy, proceed as described in chapter 5.5.1.
Picture 134:
Select reference line
