Titan 3 Magnet Service Kit & Instructions
This step by step guide will assist you in successfully servicing your Titan 3 magnet to further your
investments lifespan in the precast yard. Ongoing maintenance of each magnet will ensure they
perform as expected and will reduce potentially ongoing replacement costs.
For the purpose of servicing your Titan 3 you can replace either the Body or the Handle. In both
scenarios, you reuse your existing magnet pack or old handle, depending on what you are servicing
or replacing.
Equipment Required
The following items will ensure your able to disassemble your old magnet case without causing
further damage and will allow for a fast reassembly with your new service kit. These items can be
used for servicing both the Body & the Handle Kits.
Emphasis needs to be made with regards to
conducting this work on a non-metallic surface. Failure to follow this guide could result in hazard to
the operator hands or the magnet being stuck to the flat metallic surface to which it will never be
removed.
1
Non-metallic workspace
2
Cordless Drill
3
4mm Allen Key or Bit
4
6mm Allen Key or Bit
5
Phillips head screw driver or Bit
6
Thin Blade flat head screw driver
7
Small Scrubbing Brush
8
WD40 & Cloth
9
Safety Glasses
