Continued.
Insert the Handle guide pin collets into the
magnet
pack “kidney” sections
. These will be
either new ones if you are replacing the
Handle, or the ones from the old handle.
Be sure to insert the White Teflon washers
onto the guide pin before sliding it through.
These enable smooth function of the handle
and prevent wear against the handle arm
and the guide bushes.
Press the magnet pack up inside the case so
it engages with the Demagnetising strip. This
will aid in sliding the Guide pin and handle
through the kidneys.
Using the Handle portion with the guide pin
attached slide it through the collet and
through to the other side until the steel
portion of the handle upright is snug inside
the case.
