Reikel ID716 Original Instructions Manual Download

Page: 10 / 15

Original Instructions

Fig. 1

1. Chuck

2. Plastic Depth gauge

3. Function switch

4. Auxiliary handle

5. Lock-on button

6. ON/OFF switch

7. Forward/Reverse switch

8. Variable speed dial

9. Key

2. SAFETY SYMBOLS

Explanation of symbols

In this manual and/or on the machine the following symbols are may used:

Read instructions carefully

In accordance with essential applicable safety standards of European directives

Class II machine

– Double insulation – You don’t need any earthed plug.

Denotes risk of personal injury, loss of life or damage to the tool in case of non-

observance of the instructions in this manual

Faulty and/or discarded electrical or electronic apparatus have to be collected

at the appropriate recycling locations

Immediately unplug the plug from the mains electricity in the case that the cord

gets damaged and during maintenance.

Summary of Contents for ID716
















Search results

Summary of Contents for ID716

Reviews:

Related manuals for ID716

Brands by name

Popular brands

Reikel ID716, Original Instructions Manual

Search results

Summary of Contents for ID716

Reviews:

Related manuals for ID716

Brands by name

Popular brands