Original Instructions
Fig. 4
1. For forward (clockwise) rotation, push the forward / reverse switch to the position of
diagram.
2. For reverse (counterclockwise) rotation, push the forward / reverse switch to the
position of diagram.
WARNING:
Although an interlock prevents reversing the tool while the motor is running,
allow it to come to a full stop before reversing.
Drilling speed adjustment
Fig. 5
You can vary the drilling speed by press different pressure on the trigger switch while
drilling if necessary.
To vary the drilling speed, you also can rotate the variable speed knob to get the desired
drilling speed.
Select the impact/drill mode
Fig.6
The impact/drill switch should be set according to the type of action required. The tool has
two settings:
Drill mode : For drilling into wood and metal. Use standard drill bits.
Impact mode : For drilling into stone and masonry. Use masonry drill bits.
4. USE
Operating the drill
Start the tool by squeezing the variable speed trigger switch.
Release the trigger to stop the tool.
If you press the lock on button while the trigger switch is depressed, the switch is kept in
the operating position. This is convenient when continuous operating for extended periods
of time is required.
To release the lock on button, press and release the trigger switch.
