Original Instructions
EXTRA SAFETY REGULATIONS CONCERNING IMPACT DRILL
Wear ear protectors with impact drills.
Exposure to noise can cause hearing
loss.
Use auxiliary handles supplied with the tool.
Loss of control can cause
personal injury.
Hold power tool by insulated gripping surfaces, when performing an
operation where the cutting accessory may contact hidden wiring or its
own cord.
Cutting accessory
contacting a “live” wire may make exposed metal
parts of the power tool “live” and could give the operator an electric shock.
If possible, always use clamps or a vice to hold your work.
Always switch off before you put the drill down.
Ensure that the lighting is adequate.
Keep the area free of tripping hazards.
Only use accessory bits in good condition.
Before drilling, check that there is sufficient clearance for the drill bit under the
workpiece.
Do not touch the bit after operation. It will be very hot.
Keep your hands away from under the workpiece.
Never use your hands to remove dust, chips or waste close by the bit.
Rags, cloths, cord, string and the like should never be left around the work area.
Support the work properly.
If you are interrupted when operating the drill, complete the process and switch
off before looking up.
Periodically check that all nuts, bolts and other fixings are properly tightened.
When using the drill, use safety equipment including safety glasses or shield,
hearing protection, and protective clothing including safety gloves. Wear a dust
mask if the drilling operation creates dust.
Children and frail people must not use this tool. Children should be supervised at
all times if they are in the area in which the tool is being used. It is also
imperative that you observe the accident prevention regulations in force in your
