7
●
mezzo is available with firmly integraded battery as power only system.
●
In combination with one of the optionally available XY-tables the user may
increase the comfort of the use.
Medical device
This reading system is classified as a medical device, class I according to 93/42/EEC,
Annexe IX, standard 12. For the distribution to countries outside the EU the respec
-
tive country-specific guidelines have to be regarded.
Purpose
This opto-electronic reading system is a medical device to assist with the reading
and magnifying of printed text and pictures. Visually impaired people can compen
-
sate for their loss of visual acuity by using this device.
Evolution and lifetime of products
The Medical Device Directive regulates by law that manufacturers of medical
devices shall determine a period of safety operation of a product. We fulfill hereby
legal requirements and determine - for formal reasons - a period of three years
after date of first purchase.
Note:
The mentioned life span does not reflect the complete life span of the mezzo.
It is rather an indication on when the product might be obsolete and substitution
might be recommended due to new product developments.
Safety advice
mezzo has to be installed in closed and dry rooms only. Do not plug mezzo into an
electrical circuit that is also being used for any life sustaining or support systems.
The device may not be used in the patients environment.
This device should not be operated in explosion-endangered environments. This
opto-electronic device should only be installed in conjunction with modern electrical
circuitry.
Combination with other medical products
Warning:
This reading system must not be located directly besides, next or on top
of another medical life sustaining device. If the device is used near another electri-
cal device, monitor the other device to ensure that it is working properly. In case of
doubt please contact Reinecker Vision GmbH or any licensed distribution partner.
Precautions by alteration of the performance of the system
Stop using the reading device if technical features or performances should change.
Switch the device OFF and disconnect the power supply from the mains wall socket.
Refer directly to your authorized dealer or to Reinecker Vision GmbH Service Center.
Do not use the system again in this condition.
