8
Reinstatement / installation and maintenance
This device may be technically maintained and reconditioned by Reinecker Vision
GmbH only or by an authorized technician. Reinstatement may only take place after
the system has been cleaned and safety checked.
Cleaning of the system
●
mezzo has to be disconnected from the power supply before cleaning.
●
Clean the system with a slightly damp cloth and a mild household detergent.
●
Interior of device must NOT come in contact with liquids.
Special advice for transport and storage
For reasons of safety, the unit must only be transported and stored in the original
packing. The unit must be stored in dry and closed rooms in the original packing.
The following conditions for transport and storage have to be respected:
●
Air pressure 700 - 1000 hPa
●
Temperature range +5°C to + 50°C
●
Relative air humidity 30% to 80%
Disposal of the unit according to EU directive 2002/96/EEC
mezzo contains of electronic components. To avoid damage to the environment, the
country-specific rules have to be respected.
Power supply
Only use the original power supply and cables which are included in the delivery by
Reinecker Vision GmbH.
Caution:
The use of any other equipment might lead to an increased electromag-
netic emission and to a product damage.
Safety of batteries
For safety reasons, the manufacturer recommends changing the battery after two
years. If the battery has not been changed after this period of time, the manufacturer
accepts no responsibility and excludes any recourse.