26
Changing the ink - ribbon cassette
3
21
23
22
20
24
25
Press
[ set ]
, the print head moves to the right position
Turn up the front cover and remove it
Set the trigger mode switch (3) to position 2
Remove the used cassette by the grip (21). Do not tilt
Slide in the new cassette until it latches. While sliding in the
cassette, slightly turn the rotary button (22) in direction of arrow.
Position ribbon on right-hand roller guide (23) , push it
between the guides of the print head (25) and the red
foil mask (20) and position it on left-hand roller guide (24)
as you can see in figure below
Use the rotary button (22) to tighten the ink ribbon.
The ink ribbon must lie completely behind the white plastic
disks (23 u. 24) of the roller guides.
Set the trigger mode (3) to the desired position
Mount front cover