29
Key function (printing disable)
After activating the chip card function (see page 22, chip card on)
printing with
jetStamp
is only possible with an inserted chip card.
If the chip card is missing,
InSErT CHIPCArd
will be displayed.
Operator’s identification on the chip card
An operator’s identification stored on the chip card can be
printed at the end of an imprint. This operator’s ID can be
combined with a standard stamp picture, stored in the device
or with a customer stamp picture, stored on the chip card.
First, the chip card function must be active (see page 22)
and the desired number of a stamp picture must be entered.
After inserting the chip card, the printing process can be
triggered.
The maximum printing width is 60 mm, so the operator’s
identification cannot be included with all stamp pictures.
(see pages 13 ... 17)
Imprint example:
Printing the first print line (Line 1) from chip card
Before printing the Line1 stored on the chip card,
the chip card function must be active (see page 22) and
stamp picture no. 00 must be set (see page 13)
Insert the chip card. Subsequent the stamp picture
appears in the display and the device is ready to print
the first text line.
operator’s identification
123456
19.05.06 09:40
BSP
i
Note
i
Note
i
Note