12
GB
5.3. Reactivating the print head
If ink has dried inside the print head
4
it may be necessary
to reactivate it.
„
Lay the print head down on a firm surface protected by
a lint-free cloth or piece of material.
„
Place the syringe supplied firmly against the opening on top
of the print head
4
and carefully inject a small amount of air
(approx. 0.5 ml).
PLEASE NOTE
Risk of staining from discharged ink.
„
Wipe up discharged ink with a lint-free cloth or piece of
material.
5.4. Cleaning the print head contacts
In rare cases, dirt on the print head contacts
7
may result in
inferior printing results.
„
Clean the contacts on the print head
4
and in the device with
a soft cloth or cotton bud, if necessary lightly soaked
in ethanol (spirits).
Disposal
Directive 2002/96/EC (WEEE)
Electrical and electronic equipment and batteries
should not be disposed of along with domestic
or general waste. Dispose of equipment in an
environmentally friendly way.
Summary of Contents for P1-MP
Page 1: ...GB P1 MP Operating Manual ...
Page 8: ...37 Notes ...
