ENGLISH
______________________________________________________________________________________________
_____________________________________________________________________
C.A.P.T. S.r.l. con Unico Socio
Soggetta a direzione e coord. di
Maschinenfabrik Reinhausen GMBH
Via Postale Vecchia 17
36070 Trissino (VI), Italia
Phone:. +39(0)445/962297
Fax: +39(0)445/490606
http://www.capt.it
E-mail:
PEC :
capt@legalmail.it
REINHAUSEN
GROUP
MAN-099-EN - rev.02 EN
9
5.2
Preparation of cover or tank wall
Figure 7. Figure 8.
Prepare inside the cover/tank wall with two pins D=6mm and with a hole D=27 H12 before to
mounting the handle mechanism as shown in the figure 9. The pins are required in order to
prevent the rotation of handle body (at least one pin is necessary).
Figure 9.
5.3
Mounting of the drive handle
Enter the threaded bushing inside the D=27 H12 hole. Pins should accommodate in the provide
hole (see figure 10, 11) as shown in figure.
X
X
