Aux Operation
Repeatedly press the MODE button to cycle through the functions until “AUX”
is shown on the display.
To connect using the Aux function simply plug in a 3.5mm jack to the AUX-IN
port on the front of the jukebox, then connect the other end of the cable to
your device. This is usually the headphone socket on your device, but please
check with your devices handbook prior to use.
VOL+/NEXT Button
Long press to adjust the volume higher.
VOL-/PREV Button
Long press to adjust the volume lower.
You will not be able to Pause/Play, Skip Forward/Back, Stop using the jukebox
controls in this mode, you must use your connected device for this.
Please ensure that when in Aux mode, the volume on your connected device
is set to full. You will then get the full range of volume control using the
jukebox volume controls.
11
