REKA III
Art. Nr. 9106
10
Note: - Do not lay gun on its side
- Do not direct glue jet towards people
- Do not hold nozzle top upwards
- Never work without having mounted a nozzle
- Do not carry out overhead work
- Never exceed glue operating temperature
- Stop using the instrument, if casing is damaged due to shock, breakage or heavy wear.
Even if the gun has been switched off, it may be under pressure and glue might flow out!
When using the stand, remove wire strap!
Cleaning and Maintenance
Only fill clean cartridges into the premelting tank. Contaminated glue, nails, clamps, sand, etc. cause
malfunctions.
If you observe the operating instructions, the gun does normally not need cleaning.
When PUR hot melts are used, the adapter and nozzles have to be cleaned. We advise to use special
cleaning material in 310 ml cartridges.
If the gun is used very often, it has to be maintained regularly. To set a date, please call our service depart-
ment.
Additional Information
Do you have any more questions or requests? We should be glad to help you.
Please contact us at phone no. ++49-721-970 780 or fax no. ++49-721-705 069
Our mailing address is:
Reka Klebetechnik GmbH & Co. KG.
Siemensstr. 6
D - 76344 Eggenstein
Germany
e-mail: info@reka-klebetechnik.de
Internet: www.reka-klebetechnik.de
Summary of Contents for TR 70 LCD Series
Page 12: ...REKA III Art Nr 9106 12...
Page 14: ...REKA III Art Nr 9106 14...
