Pg. 10
Doc ID: 191-2847A
Doc Rev: 091020
The Rekluse TorqDrive® clutch can increase the torque transferred
from the engine to the drivetrain. Do not use higher force pressure
plate springs than those included in the kit.
Doing so can cause
accelerated wear and fatigue to components that can lead to
part failure, engine damage, bike or vehicle damage, injury,
and/or loss of life.
5. Torque the pressure plate bolts in small increments in a
star pattern to OE specifications.
6. Install the supplied clutch cover spacing gasket if
included in your kit. If none is supplied, simply reuse
your OEM sealing gasket.Reinstall the clutch cover, then
reinstall the cover bolts.
7. Lightly tightening the cover bolts in a star pattern.
Torque the bolts in small increments in a star pattern
before tightening the bolts to
89 in-lb (10 N-m) per OE
specifications.
OEM Components