Pg. 12
Doc ID: 191-2847A
Doc Rev: 091020
increased with clean oil and other bike factors that reduce
engine heat.
·
Check clutch lever free play.
·
Inspect all of your clutch parts at regular maintenance
intervals for signs wear or excessive heat, and replace
components as necessary. Clutch wear is dependent on
the riders use.
·
Inspect and replace basket sleeves if they appear to be
notched from friction disks.
·
Keep up with regular oil changes as per the bike
manufacturer’s recommendations. Clutch performance
and longevity depend on clean oil.
·
For optimal clutch performance Rekluse recommends
using fresh, clean oil that
meets JASO-MA
oil rating
requirements.
·
Repeat the break-in procedure anytime you replace the
friction disks. Always soak friction disks in new oil for at
least 5 minutes before installing.
Disk inspection examples
When inspecting the clutch pack, the following pictures can
be used as a reference.
These are best viewed in color by
viewing this install document at
www.rekluse.com/support.
